7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi

7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi
7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi 7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi 7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi 7" Touch Screen HDMI/VGA/AV Display Kit for Raspberry Pi
Product Code: MYD0146
Availability: 9
Price: RM233.20
Exclude GST: RM220.00
Qty:     - OR -   Add to Wish List
Add to Compare

So you have a Raspberry Pi, a MK802 series or a Cubieboard? Cool. You hacked it and had it working as a mini pc? Cooler. But wait, a computer has a screen, literally. Why not try a beatutiful 7" Touch Screen Display? Connect a HDMI cable or  pluging in directly to the Raspberry Pi and you can make it work quickly. 

A power adapter is needed for this cute monitor.It could be 5~12V(2A will be better). Whatsmore, the driver board can drive screens between 4.3" and 15", the singal will take the full screen when the resolution ratio is 800x640. And if you still haven't got any friendly monitor for your project, just try it!

APPLICATIONS

Raspberry Pi/MK802/MK802IIIs/Cubieboard2 Display
Custom Embeded system based on Mini PC

SPECIFICATION

  • 7" screen
  • 5V~12V 2A Power Supply is needed
  • VGA/HDMI display while HDMI must be 50pin RGB or LVDS
  • Screens from 4.3" to 15" of 3.3V which use LVDS ports can be drived by the driver board
  • Five buttons for you to set your screen or reset
  • Raspberry Pi & MK802 & Cubieboard2 & PC display
  • External dimension:161.2x105.5mm ( 6.35x4.15")
  • Display dimension: 150.72X94.2mm(5.93x3.71")
  • Visual Angle: 89/89/89/89 (all angles)
  • Scan frequency: 60Hz
  • Illuminant kind:WLED
  • Resolution:1280x800
  • Panel brightness:400cd/m2
  • Signal Interface: Parallel RGB (1 ch, 6-bit)

DRIVER BOARD INTERFACES

  • 1. Power Supply(5~12V 2A)
  • 2. HDMI
  • 3. VGA Connector
  • 4. AVI
  • 5. AV1+AV2
  • 6. Keyboard
  • 7. TTL Signal 50Pin
  • 8. LVDS Signal 1/2 ch 6bit 8bit
  • 9. 12V Backlight 10.Inverter Connector 

MORE INFORMATION

  • This controller board support Automatically Switch to AV2 (Reversing View camera). Please connected ACC to 12V. 
  • The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select

SHIPPING LIST

  • 1* HDMI+VGA+2AV Controller Board VS-TY2662-V1 (Support Automatically switch to AV2) 
  • 1* 7" 800*480 Lcd Panel AT070TN90 
  • 1* 5-button switch and adjustment panel 
  • 1* 7" Touch Screen Kit 

NOTE

  • Power Supply is NOT included.
  • If you want to conect this screen to your Raspberry Pi, you need a AV Cable or a HDMI Cable, or if you have a HDMI TO VGA CABLE For Raspberry pi, you can use a VGA Cable to connect your Raspberry pi to this Screen. 
  • There is a sticker on the LCD screen. Please peel off before use. 

DOCUMENTS

https://s3.amazonaws.com/ttbox/7lcdtouch.zip 

Touch Panel Linux Driver

https://s3.amazonaws.com/ttbox/7Touchlinuxnewest.rar 

INSTALLATION

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Notify Me When This Product is Available